Publicité
To reduce the impact of noise emission, limit the time of operation, use low-noise operating modes as
well as wear personal protective equipment.
Take the following points into account to minimize the noise exposure risks:
1. Only use the product as intended by its design and these instructions.
2. Ensure that the product is in good condition and well maintained.
3. Use correct application tools for the product and ensure they in good condition.
4. Keep tight grip on the handles/grip surface.
5. Maintain this product in accordance with these instructions and keep it well lubricated
(where appropriate).
6. Plan your work schedule to spread any high vibration tool use across a number of days.
KEEP GUARD IN PLACE and in working order.
ALWAYS check the tool for damaged parts. Before further use of the tool, a guard or other part
that is damaged should be carefully checked to determine whether it will operate properly and
perform its intended function. Check for misalignment or binding of moving parts, broken parts
and any other condition that may affect the tool's operation.
A guard or other part that is damaged should be properly repaired or replaced by a qualified person.
The blade guard on your saw has been designed to automatically raise when the arm is brought
down and to lower over the blade when the arm is raised.
The guard can be raised by hand when installing or removing saw blades or for inspection of the saw.
NEVER RAISE THE BLADE GUARD MANUALLY UNLESS THE SAW IS TURNED OFF.
ACCESSORIES
The Compound Miter Saw is supplied with the following accessories as standard:
• 36 Teeth blade (fitted)
• Dust bag
• Workpiece clamp
3. GENERAL POWER TOOL SAFETY WARNINGS
WARNING! Read all safety warnings instructions, illustrations and specifications
provided with this power tool. Failure to follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
• Support stand
• 6mm Hex key
• Vacuum adapter for (diameter)35mm hose
FR
ES
PT
IT
EL
PL
UA
RO
EN
205
205
Publicité
