Publicité
2. Regularly check the device's power cable and all extension cables used for damage. If the supply
cord needs replacing, the task must be carried out by the manufacturer, the manufacturer's
agent, or an authorized service centre in orderto avoid a safety hazard.
Replace damaged extension cables.
3. lf the carbon brushes need to be replaced, have this done by a qualifed repair person (always
replace the two brushes at the same time)
LUBRICATION
The grease in the gearbox will require replacement after extensive use of the tool. Please refer to an
authorised service agent to provide this service
SERVICE
• Tool service must be performed only by the manufacturer or the authorized agent.Service or
maintenance performed by unqualifed personnel could result in a risk ofinjury.
• When servicing a tool, use only identical replacement parts. Follow instructions in the
Maintenance section of this manual. Use of unauthorized parts or failure to follow
Maintenance Instructions may create a risk of electric shock or injury.
CLEANING
Clean dust and debris from vents. Keep handles clean, dry and free of oil or grease. Use only mild
soap and a damp cloth to clean, since certain cleaning agents and solvents are harmful to plastics
and other insulated parts. Some of these include gasoline, turpentine, lacquer thinner, paint
thinner, chlorinated cleaning solvents,ammonia and household deter-gents containing ammonia.
Never use flammable or combustible solvents around tools.
STORAGE & DISPOSAL
Switch the miter saw off and unplug it.
Store the miter saw and its accessories in a dark, dry,frost-free, well-ventilated place.
Always store the miter saw in a place that is inaccessible to children. The ideal storage temperature
is between 10°C and 30 °C.
We recommend using the original package for storage or covering the miter saw with a suitable
cloth or enclosure to protect it against dust.
TRANSPORTATION
Switch the miter saw off.
Protect the miter saw from any heavy impact or strong vibrations which may occur during
transportation in vehicles.
Secure the miter saw to prevent it from slipping or falling over.
FR
ES
PT
IT
EL
PL
UA
RO
EN
221
221
Publicité
