Publicité
FR
ES
8. INTENDED USE
PT
This miter saw is intended for cutting wood and analogue materials, it is suitable for straight cuts having
miter angles of up to 45. The saw is not designed for cutting firewood. Do not use machines, tools and
IT
accessories for additional applications (see manufacturer's instructions) for works other than those for
which they are designed for. All other applications are expressly ruled out.
EL
9. NOT INTENDED USE
PL
If not intended use, the risk of fire, electric shock and personal injury maybe further and
- The provisions contained in this guarantee are not intended to limit, modify, take away from, disclaim
UA
or exclude any statutory guarantee set forth in any applicable provincial or federal legislation
The Environment for operation:
RO
The work area should be well and clean, do not operate this machine in explosive atmospheres,
such as in the presence of flammable liquids, gases or dust. and do not expose it to rain or wet
EN
conditions.
10. OPERATING INSTRUCTIONS
Important: Be sure the supply is the same as the voltage given on the rating plate. Remove the
mains plug before carrying out any adjustment or servicing.
ASSEMBLY
Warning: To prevent the accidental starting that could cause possible serous personal injury,
ALWAYS assemble all parts to you saw BEFORE connecting it to the power supply. The saw should
NEVER be connected to a power supply when you are assembling parts, making adjustments,
installing or removing blades, or when not in use.
This machine is not applicable for non-through cutting operations such as grooving/slotting.
1. DUST EXTRACTION PORT
to reduce buid up of saw dust and maintain top efficiency of cutting, the saw dust collection can be
achieved by clipping a dust bag on the Dust extraction port (1).A dust bag(22) and Adaptor (24) is
provided for use on your miter saw.To install it,simply fit the dust bag over the Adaptor(24).
To empty the dust bag,remove it from the dust exhaust port,open the dust bag by unzipping
theslide fastener.
NOTE: To ensures optimal dust collecting, empty the dust when it becomes filled to approximately
2/3 of its capacity.
214
214
Publicité
