Télécharger Imprimer la page

practyl J1G-ZP18-210-3 Manuel D'instructions page 212

Publicité

WARNING!
This product produces an electromagnetic field operation! This field may undersome circumstances
interfere with active or passive medical implants! To reduce the risk of serious or fatal injury,
we recommend persons with medical implants to consult their doctor and the medical implant
manufacturer before operating this product!
WEAR GOGGLES
WEAR EARMUFFS
WEAR A BREATHING MASK
WARNING!
For your own safety read instruction manual before operating miter saw. Wear
eye protection. Keep hands out of path of saw blade. Do not operate saw without
guards in place. Do not perform any operation freehand.
Never reach around saw blade. Turn off tool and wait for saw blade to stop before
moving workpiece or changing settings. When changing the blade, replace and
secure all quarding to its original position and correctly before starting tool.
Disconnect power (or unplug tool as applicable) before changing blade orservicing.
Do not expose to rain or use in damp locations. To reduce the risk of injury, return
carriage to the full rear position after each crosscut operation.
The tool must be used only for its prescribed purpose. Any use other than those mentioned in this
Manual will be considered a case of misuse. The user and not the manufacturer shall be liable for any
damage or injury resulting from such cases of misuse.The manufacturer shall not be liable for any
changes made to the tool nor for any damage resulting from such changes.
Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors.
The following hazards may arise in connection with the tool's construction and design:
• Damage to the lungs if an effective dust mask is not worm.
• Damage to hearing if effective earmuffs are not worn.
6. ADDITIONAL SAFETY INSTRUCTIONS FOR LASERS
Warning! The laser beam potentially causes eye damage. Do not look or stare
into the laser beam.
• During use, do not point the laser beam at people, directly or indirectly through reflecting surfaces.
• This laser complies with class 2 according to the relevant standard. The unit includes no servicing
components. Do not open the housing for any reason. If the unit is damaged, have the damage
repaired by an authorized repair agent.
• Laser viewing glasses are not protective glasses against laser radiation
FR
ES
PT
IT
EL
PL
UA
RO
EN
211
211

Publicité

loading