Publicité
Technical Data
Percussion Diamond Core Drill ESD 200
Rated voltage:
Power input:
Rated current:
Frequency:
Max. drilling diameter:
Spindle connection:
Protection class:
Degree of protection:
Net weight:
Order no.:
Interference suppression:
Gear No load speed
I
750 rpm
II
1.500 rpm
Available accessories:
Item
Diamond drill rig BST 250
Fastening set concrete / stone
Copper rings for easy removal of the drill bit
Diamond drill bits Ø82 - 250 mm
Wet/dry vacuum cleaner DSS 35 M iP
For further information about our products and our wide range of
accessories please see: www.eibenstock.com.
Diamond core drill with adapter for deduster connection (dia. 35 mm), wet-
type connector with ball valve and GARDENA connector, 2 open-end
wrench (SW32 and SW41) and instruction manual in a cardboard box.
Application for Indented Purpose
The diamond core drill ESD 200 is indented only for professional use and
may be used only by instructed personnel. With an appropriate drill bit, the
tool can be used for drilling of concrete, stone, bricks, sand-lime bricks and
pore concrete.
The machine may be used exclusively in conjunction with a vacuum
cleaner of dust category M.
Concrete and reinforced concrete are to be drilled only with soft impact
when dry drilling.
The user alone is liable for damage caused by improper use.
Rated speed
500 rpm
1.050 rpm
Supply
230 V ~
2500 W
11.5 A
50/60 Hz
51 – 205 mm (optimal – 202 mm)
1 ¼" UNC
I
IP 20
8,9 kg
0352W000
EN 55014 and EN 61000
Percussion frequency
10.000 rpm
21.000 rpm
21
max. drilling Ø
250 mm
122 mm
Order no.
09631000
35720000
35450000
09919000
Publicité
