Télécharger Imprimer la page

Alpine 3DE-7886R Mode D'emploi page 10

Publicité

Centre Hole
Orifice central
Orificio central
IMPROPER
INCORRECT
INCORRECTO
10
Centre Hole
Orifice central
Orificio central
Bumps
Résidus
Abultamientos
New Disc
Disque neuf
Disco nuevo
Outside (Bumps)
Péniférie (résidus)
Borde exterior
(abultamientos)
IMPROPER
INCORRECT
INCORRECTO
ALPINE 3DE-7886R (MN7886 RO) (
Precautions
New Discs
As a protective measure, the CD changer will
automatically eject discs that have either been
inserted intorrectly or have irregular surfaces. If
a new disc is ejected immediately after loading,
use your finger to feel around the outer edge of
the CD and its centre hole. If you feel any small
bumps or irregularities, this could inhibit proper
loading of the disc. To remove the bumps, rub
the inside edge of the hole and outside edge of
the disc with a ball-point pen or other such
instrument, then insert the disc again.
Handling Magazine
When discs are being exchanged in the 3DE-
7886R, the magazine is pushed out from the
changer. While this operation is in progress, do
not try to pull out the magazine or stop its
movement in any way, as this could cause
damage to the mechanism. In addition, be
aware of the changer's operation so it will not
interfere with your driving. For example, before
changing gears, check the position of the
magazine so as not to hit it while it is changing
discs.
CAUTION:
Do not insert anything other than magazine into
the insertion slot.
E
,F,S) 68P91508W77-O -PF
English

Publicité

loading