Publicité
1. Make sure that the power trigger is locked when the
power trigger lockout is in its initial position.
(Fig. 28)
2. Push the power trigger and make sure that it moves
back to its initial position when you release it.
(Fig. 29)
3. Make sure that the power trigger and the power
trigger lockout moves freely and that the return
spring works correctly.
(Fig. 30)
4. Start the product. Refer to
page 17 .
5. Release the power trigger and make sure that the
cutting attachment stops fully.
To do a check of the cutting attachment guard
WARNING:
attachment without an approved and
correctly attached cutting attachment guard.
Always use the recommended cutting
attachment guard for the cutting attachment
that you use, see
page 21 . If an incorrect or faulty cutting
attachment guard is attached, it can cause
serious personal injury.
The cutting attachment guard stops objects that eject
in the direction of the operator. The cutting attachment
guard also prevents injuries that can occur if you touch
the cutting attachment.
1. Stop the motor.
2. Do a visual check for damages, for example cracks.
3. Replace the cutting attachment guard if it is
damaged.
Cutting equipment
Select correct cutting equipment and do maintenance on
the cutting equipment to:
•
Get maximum cutting performance.
•
Increase lifetime of the cutting equipment.
WARNING:
attachments with the guards we
recommend! See
21 . Refer to the instructions for the cutting
attachment to find the correct way to load
the trimmer line and the correct trimmer line
diameter.
1885 - 005 - 18.12.2023
To start the product on
Do not use a cutting
Technical data on
Only use cutting
Technical data on page
WARNING:
attachment may increase the risk of
accidents.
Trimmer head
WARNING:
trimmer line is wound tightly and evenly
around the drum to prevent harmful
vibration.
(Fig. 31)
•
Only use recommended trimmer heads and trimmer
lines.
•
Only use recommended cutting attachments.
•
Smaller machines requires small trimmer heads and
vice versa.
•
The length of the trimmer line is important. A longer
trimmer line requires greater engine power than a
shorter trimmer line of the same diameter.
•
Make sure that the cutter on the trimmer guard
is intact. This cuts the trimmer line to the correct
length.
•
Soak the trimmer line in water for a couple of days
before use to increase the life length.
Battery safety
WARNING:
general instructions. Failure to observe the
safety and general instructions may result
in electric shock, fire and / or serious injury.
Keep all the safety information and general
instructions for future reference.
•
These safety instructions apply only to 18V Li-ion
rechargeable batteries for the POWER FOR ALL
system.
•
Use the rechargeable battery only in products
from POWER FOR ALL System partners. 18 V
rechargeable batteries labelled with POWER FOR
ALL are fully compatible with the following products:
– All products of the 18V POWER FOR ALL battery
system.
– All 18 V products from POWER FOR ALL System
partners.
•
Observe the battery recommendations in the
operating manual of your product. Only this way
can the rechargeable battery and the product be
operated without danger and the rechargeable
batteries protected from hazardous overloading.
•
Only charge the batteries using chargers
recommended by the manufacturer or by POWER
FOR ALL system partners. A charger that is suitable
for one type of battery may pose a fire risk when
used with a different battery.
A defective cutting
Always make sure the
Read all the safety and
13
Publicité
