Publicité
Fan Speed
Button
Lock Button
Colour Display
ERROR CODES
― ―
ERROR CODE CAUSE
E0
The wiring has malfunctioned.
E2
The humidity sensor is unable
to detect the humidity of the
environment.
LO
The humidity of the
environment is below 20%
HI
The humidity of the
environment is above 90%
CL
The temperature of the
environment is below 5°C
CH
The temperature of the
environment is above 38°C
12 of 122 | English
In auto mode, press the fan speed button to switch between high
and low fan speed. The corresponding indicator will light up.
Long press the lock button to activate child lock. All buttons on the
appliance will be locked and the child lock indicator will be on.
To remove child lock, press the lock button again. The indicator will
turn off.
Child lock will be turned off when the appliance restarts.
Note: The appliance will start up in the mode selected when the unit
was last used. The appliance will not start if the water tank is not
fitted in the unit correctly. The compressor's start is delayed by 3
minutes after the start of the fan.
The light will display different colours according to the ambient
humidity of the environment:
•
Blue – Below 45%
•
Green – Between 45% and 65%
•
Red – Above 65%
Note: The light will also be red if any of the error codes are
displayed on the LED display. See the 'error codes' section for more
information.
SOLUTION
Contact Pro Breeze Customer Care by
sending an email to help@probreeze.com
or via our website www.probreeze.com
The appliance will automatically shut
down to prevent damage. Move the
appliance to a more suitable environment
and manually restart it.
Publicité
