Publicité
Suction cups
Surfaces
Suitable surfaces
Unsuitable surfaces
Improving the connection between wall and suction cups: Clean the
surface on which you intend to attach the product. Before attaching the product,
moisten the suction cups
Removing the product: Insert a fingernail, or a similar object, under the rim
of each suction cup
˜ Operation
˜ Receiving the DCF/MSF radio signal
(Fig. B)
After inserting the battery, the product automatically starts to search for the radio
signal. This process takes about 3 to 7 minutes.
Starting and stopping the reception of the radio signal manually:
Press
.
4 ]
[
Notes:
If the product was not able to receive the radio signal, e.g. because your location
is at too great a distance from the time signal transmitter, you can set the time
manually (see "Manual settings"). The product overwrites the manually set value
as soon as reception of the radio signal is successful.
For products intended for Latvia, Romania, Cyprus, Bulgaria, Finland and Greece,
the display stops at "01:00".
Description
Smooth, dry and flat
surfaces
Smooth, dry and flat
surfaces
.
2 ]
[
to release them.
2 ]
[
Use examples
Mirrors
Glass
Glazed tiles
Terracotta
Tiles with a relief pattern
GB/IE
29
Publicité
