Publicité
˜ Using the mounting hole, the bracket stand and the
suction cups
(Fig. C)
Note: When using the mounting hole
cups
must not be removed. Otherwise the IP protection is not guaranteed.
[
2 ]
Mounting hole
You can hang the product on a wall using the mounting hole
Notes:
Check that the mounting material (screws, dowels) is suitable for the wall.
When using the mounting hole
the distance between the wall and the product.
Bracket stand
Open the back cover
Place the semi-round part in the slot at the bottom of the front side.
Close the back cover
Note: Protect sensitive surfaces before setting up the product with the bracket
stand
.
[
]
28 GB/IE
or the bracket stand
[
1 ]
, make sure the screw is long enough to cover
1 ]
[
and remove the bracket stand
3 ]
[
(see "Before initial use") (Fig. C).
3 ]
[
, the suction
[
]
at the back.
1 ]
[
.
[
]
Publicité
