Precautions - Warranty; Precautions Warning Provisions Relating To Safety - Cristec YPOWER 12V/16A Manuel Utilisateur

1 PRECAUTIONS – WARRANTY
The CRISTEC equipment includes the following :
•
A box containing the battery charger's electronic function.
• AC input connector
• DC output connector
•
This user manual
•
Specific packing
This document applies to battery chargers from the YPOWER range as listed on the cover (available in colour on our
website www.cristec.fr).
The manual is intended for users, installers and equipment maintenance staff. Please read this manual carefully before
working on the charger.
This manual should be kept safely and consulted before attempting any repairs because it contains all the information
required to use the appliance.
This document is the property of CRISTEC; all the information it contains applies to the accompanying product. CRISTEC
reserves the right to modify the specifications without notice.
1.1 P (
RECAUTIONS
Material class I according to NF EN 60335-2-29 standards.
The requirements for installation are contained in the NFC 15-100 standards and in the specific standard "for pleasure
boats – electrical systems – alternating current installations" ISO13297 reference.
The installation must be carried out by an electrician or a professional installer.
The AC network must be disconnected before starting any maintenance work on the equipment.
This equipment is not intended to be used by children.
Main precaution
Before handling the charger, please read carefully this manual.
Precautions regarding electric shocks
Risk of electric shock and danger of death: it's strictly forbidden to interfere with the charger when
under voltage.
Precautions regarding accidental earth leaks
The charger's PE terminal must be earthed and connected before any other terminal.
The charger must be closed before it is turned on with the screw provided for this purpose.
Accidental leakage current between phase and earth : standard NFC15-100 should be followed when
installing.
Use the services of an electrician or professional installer to make the necessary connections. The
charger should be connected to a system having a 30mA differential bi-polar differential circuit-
breaker.
Accidental leakage current between the charge circuit and the earth : accidental current leakage at the
earth must be detected by means of an independent protective device outside the charger (a residual
current device or an insulation detector).
) –
WARNING PROVISIONS RELATING TO SAFETY
20