Introduction; Precautions - Warranty; Precautions Warning Provisions Relating To Safety - Cristec HPO-DISPLAY-R-B Manuel Utilisateur

1

INTRODUCTION

This document applies to the HPOWER Remote Display compatible with battery chargers from the HPOWER range as
well as the display integrated to the HPOWER range. This document is available on our website www.cristec.fr. Refer to
sections 5 to 8 only for integrated display.
The manual is intended for users, installers and equipment maintenance staff. Please read this manual carefully before
working on the Remote display.
This manual should be kept safely and consulted before attempting any repairs because it contains all the information
required to use the appliance.
This document is the property of CRISTEC; all the information it contains applies to the accompanying product. CRISTEC
reserves the right to modify the specifications without notice.
2 PRECAUTIONS – WARRANTY
The CRISTEC equipment includes the following :
•
A box containing the Remote Display
•
A 7 meters cable, two 3-pole connectors and six crimp wire terminals
•
This user manual
•
Specific packaging
2.1 P
RECAUTIONS
The requirements for installation are contained in the NFC 15-100
standards and in the specific standard "for pleasure boats –
electrical systems – Extra-low-voltage d.c. installations" ISO10133
reference.
The installation must be carried out by an electrician or a
professional installer.
The DC network must be disconnected before starting any
maintenance work on the equipment.
This equipment is not intended to be used by children.
( ) –
WARNING PROVISIONS RELATING TO SAFETY
19