Overview Presentation; User Interface Area - Cristec YPOWER 12V/16A Manuel Utilisateur

2.2 O
VERVIEW PRESENTATION
The chargers are divided into 2 zones :
•
The user interface zone
•
The energy conversion zone (all maintenance in this area is forbidden except with CRISTEC authorization, under
penalty of warranty termination)
Fixing of the charger is made by 4 x M5 round head screws (screw head diameter less than 10 mm).
Center distance : see corresponding drawing in the appendices 3 to 5 depending on model.
Mounting by 4 x M5
round head screws
CONNECTIONS :
AC input terminal : WAGO type
WINSTA reference 770-813
2.3 U
SER INTERFACE AREA
Chargers YPO 12-16, 12-25 and 24-12 - See appendix 1
Chargers YPO 12-40, 12-60, 24-20 and 24-30 - See appendix 2
Terminal for temperature probe
STP-NEW-2.8 (option)

User interface area

Opening screw for user interface area
(must be screwed to ensure personnel
protection)
DC output terminal :
PHOENIX CONTACT PC 16/4-GF-10,16 BK
for models YPO 12-16, 12-25, 12-40, 24-
12, 24-20 and 24-30.
PHOENIX CONTACT PC35 HC/4-GF-15,00
BK for models YPO 12-60.
Removable front
cover
23