Specifications - Reely ROAD 1:8 GP Truggy Overheater 4WD Notice D'emploi



12. Specifications

Engine:
Combustion engine:
Cubic capacity:
Power:
Motor speed:
Bore:
Stroke:
Weight:
Fuel:
Tank capacity:
Lubrication:
Air filter:
Power transmission:
4-wheel drive:
Chassis: P-420
Undercarriage:
Front wheel suspension:
Rear wheel suspension:
Brakes:
Suspension:
Tyres:
Body:
Dimensions and weight:
Length:
Width:
Height:
Ground clearance:
Wheel track:
Wheel base:
Weight:
54
FORCE 25, with rear exhaust, ABC piston and cylinder, slide carburettor, two-chamber resonance exhaust silencer
4.58 cc
1.84 kW / 2.5 HP at 28,000 rpm
5,500 - 32,000 rpm
18.6 mm
16.6 mm
520 g
Methanol/oil based RC car model fuel, min. 5% - 25% nitromethane and 16% synthetic oil
125 cc
Self-lubricating
Dry foam air filter, dismountable
Via cardan shafts to front and rear axles
Differentials in front and rear axle
Encapsulated middle differential
All differentials have metal pinions and planet wheels
All drive axles are mounted with ball bearings
Centrifugal clutch
Bottom support plate, shock towers, RC mounting plate and brake cover made of high-strength aluminium alloy
Extremely light, sturdy and torsion-resistant
Two reinforcement tubes
Twin control arm suspension
Straining screw in the upper control arm (camber adjustable)
Front axle leg: aluminium alloy casting
Twin control arm suspension
Straining screw in the upper control arm (camber adjustable)
Racing brakes with aluminium brake discs, adjustable
Spring struts with aluminium oil-pressure shock absorbers, spring preload adjustable via spacer rings
Steering points adjustable
Front / back: High-grip complete wheels, ready to run, width: 76 mm, Ø 142 mm
Polycarbonate, printed
530 mm
420 mm
220 mm
60 mm
410 mm
350 mm
3,500 g