Publicité
3.2 Fixing the rail on the ambulance
The Superbravo 2 rail must be attached to the ambulance by means of the lower aluminium
profile and 26 DIN 7991 M8-10.1 screws. Simply remove the 4 hexagonal screws from the
ends and move the upper plate to release the profile.
The situation of the drill holes is as follows:
62
95
75
26 34
50
16
(*) If necessary, there is a template 97-0635-001 for drilling holes in the ambulance floor. You can talk to our
technical service if you have any questions.
Once the plate is fixed, the rail must be installed following these points:
1
Place the 'T' fasteners (12-0749)
in the corresponding 8 slots of the
aluminium profile until they lock into
position:
REV 2
10-24
120
380
365
2060
2
120
31
115
246
Push the rail until the mechanism stops.
Once this position is reached, tighten the
4 hexagonal screws DIN 933 M10x20,
previously removed, to 60Nm.
Instruction manual
SUPERBRAVO 1 / 2
62,
144
75
25
35
33
Publicité
