Instruction manual
SUPERBRAVO 1 / 2
3. MOUNTING THE RAIL ON THE AMBULANCE
3.1 Vehicle configuration
These installation instructions are intended for the attachment of the Kartsana Superbrava
(TG-2022) - Superbravo assembly.
The correct use and function of the Superbrava stretcher depends on the correct installation
of the fixing system (Superbravo rail) in the ambulance.
The height of the ambulance floor in relation
to the ground must not exceed 75 cm.
The fixed part of the rail should be fixed at a distance of approx. 50 mm.
door of the ambulance (from the rectangular base of the stainless steel).
Depending on the ambulance model and the type of rear bumper, the fixing dimensions
may vary and/or be adapted.
The maximum distance between the edge of the bumper and the end of the floor attachment
must not exceed 37 cm. This ensures that the stretcher can be deployed without coming
into contact with the bumper.
32
A
Max.
75 cm
TG-2022
SUPERBRAVA
(A)
from the rear
R-2021 / R-2022
SUPERBRAVO
REV 2
10-24