Publicité
Instruction manual
SUPERBRAVO 1 / 2
1. INTRODUCTION
1.1 Preface
The
SUPERBRAVO 1 and 2 (R-2021 / R-2022)
perfect attachment to the Kartsana SUPERBRAVA (TG-2022) model stretcher.
Note: Throughout this manual,
some functionality is only available in one of the 2 models, this will be specified in the
corresponding section.
The Superbravo rail has been tested in accordance with the UNE-EN 1865-5 standard.
All information on treatment, disinfection and maintenance is based on our experience and
current knowledge.
We reserve the right to make changes in the technical specifications of the rail in order to
improve the product.
1.2 Liability and warranty
The rail must be checked at the time of delivery to the relief organisation. All of the functions
must be explained in detail. The relief organisation is responsible for training all employees
in the correct use of the equipment.
The product warranty is 24 months from the date indicated on the purchase invoice.
Warranty Conditions and Warranty Certificate enclosed with the product).
The Warranty will not cover breakdown due to incorrect installation, mishandling or misuse
of the product. Repairs must be carried out by a service technician authorised by Kartsana
or its authorised representative.
The manufacturer shall not be liable for any damage to the rail caused by the use of non-
original Kartsana products. Changes or modifications made to the unit that have not been
expressly approved by Kartsana may result in errors in the equipment's operation.
1.3 Specifications
Maximum workload (unassisted):
Main regulations
Total length
Total width
Height
24
rails has been specifically designed for
SUPERBRAVO
will be used to refer to both models. When
2120 mm
R-2021
400kg
UNE-EN-1865-5
EN-1789+A1
618 mm
320 mm
(See
R-2022
400kg
2150 mm
674 mm
372 mm
REV 2
10-24
Publicité
