Publicité
• Never straighten or weld damaged cutting tools.
• Operate the brush cutter or grass trimmer with as little noise and
contamination as possible. In particular check the correct setting
of the carburetor.
•Clean the brush cutter or grass trimmer at regular intervals and
check that all screws and nuts are well tightened.
• Never service or stone the brush cutter or grass trimmer in the
vicinity of naked flames.
•Always store the brush cutter or grass trimmer in locked rooms
and with an emptied fuel tank.
Observe the relevant accident prevention instructions issued by
the relevant trade associations and by the insurance companies.
Do not perform any modifications on the brush cutter or grass
trimmer as this will endanger your safely.
The performance of maintenance or repair work by the user is
limited to those activities as described in the instruction manual.
All other work is to be done by Authorized Service Agent.
Use only genuine spare parts and accessories released and
supplied by MAKITA.
Use of non-approved accessories and tools means increased risk
of accidents. MAKITA will not accept any liability for accidents or
damage caused by the use of non-approved cutting tools and fixing
devices of cutting tools, or accessories.
First aid
In case of accident make sure that a first-aid box is available in the
vicinity of the cutting operations. Immediately replace any item taken
from the first aid box.
When asking for help, please give the following information:
• Place of accident
•.What happened
• Number of injured persons
• Kind of injuries
•Your name
Packaging
The MAKITA brush cutter or grass trimmer will be delivered in two
protective cardboard boxes to prevent transport damage.
Cardboard is a basic raw material and is therefore consequently
reuseable or suitable for recycling (waste paper recycling).
EC-DECLARATION OF CONFORMITY
CE
The undersigned, Yasuhiko Kanzaki, authorized by Makil
S.A. Head office, 2, Allee des Performaces, Zone Industi
Richardets, (B.P.119) 93162 Noisy Le Grand Cedex. Franc
that the
Brush cutter or Grass trimmer, Model RBC220, Rl
RBC221. RBC251, RST250,
manufactured by Robin.
is in compliance with the following standards or star
documents,
prEN31806 May 1994
Noisy Le Grand Cedex, 15 November 1994
Yasuhiko Kanzaki
President
This declaration only applies to machines which are in coi
with CEN standard
NO. 6
6
Publicité
