Publicité
packs of all systems are only to be handed in
to the waste collection points in a discharged
state. The batteries must always be protected
against short circuits by taping off the poles.
All end users are responsible for deleting any
personal data stored on waste devices prior
to their disposal.
Disposal of the packaging
The packaging consists of cardboard
and correspondingly marked plastics
that can be recycled.
– Make these materials available
for recycling.
Technical data
Item number
Model
Nominal voltage
Nominal output
Protection class
Degree of protection
Idling speed
Diameter of saw blade
(exterior)
Hole in saw blade (interi-
or)
Saw blade thickness
Cutting line width
min. workpiece size
(length × width × height)
Riving knife thickness
Permissible saw blade
type
Not permitted saw blade
type
Saw blade angle
Cut height with vertical
saw blade
Cut height with 45° saw
blade angle
Sound power level (L
Noise pressure level
(L
)*
PA
Dimensions of saw table 525 × 400 mm
Diameter of connecting
pieces
Weight
*)
The noise emission values indicated have been measured
according to a standardized test method and can be used to
compare one power tool with another. The noise emission val-
ues indicated can also be used for a preliminary assessment of
the exposure. Warning: The noise emissions during the actual
use of the power tool may differ from the indicated values,
450254
TKS-1200/210 A
230 V~, 50 Hz
1200 W
I
IP20
-1
4800 min
210 mm
30 mm
1,4 mm
3 mm
60 × 30 × 3 mm
2,0 mm
HM (hard metal)
TCT (tungsten
carbide tipped)
0–45°
0–48 mm
0–45 mm
)* 106,2 dB(A)
WA
(K = 3 dB(A))
93,2 dB(A)
(K = 3 dB(A))
40 mm
ca. 15 kg
depending on the way in which the power tool is used, in particu-
lar what type of workpiece is being machined. Safety measures
must be defined to protect the operator, based on an estimation
of the vibration load during actual conditions of use (taking into
consideration all parts of the operating cycle, such as time peri-
ods when the power tool is switched off and time periods when
it is switched on but running without a load).
Noise emission specifications according to the German Product
Safety Act (ProdSG) or the EC Machinery Directive: The sound
pressure level at the workplace may exceed 80 dB(A). If this is
the case, the user must take noise protection measures (e.g.
wearing appropriate hearing protection and taking regular
breaks).
Note: The product is intended for use
only in properties having a mains cur-
rent carrying capacity of ≥100 A per
phase and being supplied by a distri-
bution network with a mains voltage of
230 V. If required, contact the electric-
ity company to ensure that the mains
current carrying capacity at the con-
nection point to the public power grid
is adequate for connecting the prod-
uct.
GB
69
Publicité
