Publicité
GB
Table of contents
Before you begin... . . . . . . . . . . . . . . . . 56
For your safety . . . . . . . . . . . . . . . . . . . . 56
Your device at a glance . . . . . . . . . . . . . 64
Unpacking and assembly . . . . . . . . . . . 64
Operation . . . . . . . . . . . . . . . . . . . . . . . . 65
Cleaning and maintenance . . . . . . . . . . 67
Storage and transport . . . . . . . . . . . . . . 68
Faults and remedial measures . . . . . . . 68
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . 68
Technical data . . . . . . . . . . . . . . . . . . . . 69
Tuotevastuu . . . . . . . . . . . . . . . . . . . . . 240
Before you begin...
Intended use
The device is intended for longitudinal and
cross-cutting of solid wood, coated wood,
chip board, block board and similar wood-like
materials. Round workpieces may not be
sawed since they can be twisted by the rotat-
ing saw blade.
Only materials may be processed for which
the corresponding saw blade is approved.
The product must not be used for sawing fire-
wood.
Only saw blades suitable for the device (HM
or CV saw blades) may be used. The use of
HSS saw blades and cut-off wheels of any
type is forbidden.
This product is not intended for commercial
use. Generally acknowledged accident pre-
vention regulations and enclosed safety
instructions must be observed.
Only perform work described in these instruc-
tions for use. Any other use is improper. The
manufacturer will not assume responsibility
for damage resulting from such use.
What are the meanings of the symbols
used?
Danger notices and information are clearly
marked throughout these instructions for use.
The following symbols are used:
DANGER! Direct danger to life and
risk of injury! Directly dangerous sit-
uation that may lead to death or
severe injuries.
WARNING! Probable danger to life
and risk of injury! Generally dan-
gerous situation that may lead to
death or severe injuries.
56
Tran slation of the original instructions
Circular table saw
These symbols identify the required personal
protection equipment:
For your safety
General safety instructions
• To operate this device safely, the user
must have read and understood these
instructions for use before using the
device for the first time.
• If you sell or pass the device on, you must
also hand over these operating instruc-
tions.
General power tool safety warnings
• Save all warnings and instructions for
future reference. The term "power tool"
in the warnings refers to your mains-oper-
ated (corded) power tool or battery-oper-
ated (cordless) power tool.
Work area safety
• Keep work area clean and well lit. Clut-
tered or dark areas invite accidents.
• Do not operate power tools in explo-
sive atmospheres, such as in the pres-
ence of flammable liquids, gases or
dust. Power tools create sparks which
may ignite the dust or fumes.
• Keep children and bystanders away
while operating a power tool. Distrac-
tions can cause you to lose control.
CAUTION! Possible risk of injury!
Dangerous situation that may lead to
injuries.
NOTICE! Risk of damage to the
device! Situation that may lead to
property damage.
Note: Information to help you reach a
better understanding of the processes
involved.
WARNING! Read all safety warn-
ings, instructions, illustrations and
specifications provided with this
power tool. Failure to follow all
instructions listed below may result in
electric shock, fire and/or serious
injury.
Publicité
