Publicité
PRODUCT OVERVIEW
The stand concrete grinder is a power tool for grinding large, hard surfaces using a diamond blade. The grinder is equipped with a
dust extraction port, allowing the connection of an external dust extraction system to reduce dust in the workplace. The adjustable
stand allows the grinder to be guided steadily and the handle height to be adjusted to the height of the operator. Proper, reliable
and safe operation of the power tool depends on appropriate use, that is why you should:
Read the entire manual before the fi rst use of the tool and keep it for future reference.
The supplier is not liable for any damage resulting from failure to observe the safety instructions and recommendations contained
in this manual.
PRODUCT ACCESSORIES
The tool comes complete but requires some assembly work. The grinder package includes
- additional handle
- grinder guard
- diamond blade,
- grinder stand
SPECIFICATIONS
Parameter
Part No.
Mains voltage
Mains frequency
Rated power
Rated speed (disc)
Spindle size
Diamond blade diameter
Blade opening diameter
Weight
Noise level
- sound pressure L
± K
pA
pA
- power L
± K
wA
wA
Vibration level
± K (handle/auxiliary handle)
ah,w
Insulation class
Protection rating
The declared noise emission value has been measured using the standard test method and can be used to compare one tool to
another. The declared noise emission value can be used in the preliminary exposure assessment.
The declared total vibration value has been measured using the standard test method and can be used to compare one tool to
another. The declared total vibration value can be used in the initial exposure assessment.
Note! The vibration emission during tool operation may diff er from the declared value, depending on the manner the tool is used.
Note! Safety measures to protect the operator, which are based on an assessment of exposure under actual conditions of use (in-
cluding all parts of the work cycle, such as the time when the tool is switched off or idle and the activation time), must be specifi ed.
GENERAL WARNINGS FOR THE SAFETY OF POWER TOOLS
Warning! Read all safety warnings, illustrations and specifi cations provided with this power tool. Failure to do so may
result in electric shock, fi re or serious injury.
Keep all warnings and instructions for future reference.
The term "power tool" used in warnings applies to all tools driven by power both wired and wireless.
Workplace safety
Keep the workplace well-lit and clean. Disorder and poor lighting can be causes of accidents.
Do not work with power tools in an environment with an increased risk of explosion, containing fl ammable liquids, gases
or vapors. Power tools generate sparks that can ignite dust or fumes.
O R I G I N A L
18
EN
Unit
[V~]
[Hz]
[W]
[min
-1
]
[mm]
[mm]
[kg]
[dB (A)]
[dB (A)]
[m/s
2
]
I N S T R U C T I O N S
Value
YT-82163
230
50
1500
3000 – 4000
M14
180
22.2
3.8
95.0 ± 3.0
103.0 ± 3.0
2.5 ± 1.5/≤2.5 ± 1.5
II
IPX0
Publicité
