Publicité
1. Introduction
Congratulations on the purchase of your new device. You have thus chosen a high-quality product. The manual is part of this product. It contains important in-
structions for safety, use and disposal. Familiarise yourself with all operating and safety instructions before using the product. Only use the product as described
and for the specified areas of application. Hand over all documents when passing the product on to third parties.
1.1 Intended use
The compressor is used to operate pneumatic tools in the home workshop. It is designed to draw in and compress clean, dust-free, dry and uncontaminated
ambient air. The ambient air must not contain any aggressive or flammable admixtures. The compressor may only be used in closed spaces with sufficient ven-
tilation. Pneumatic tools can be connected to the compressor and used for blowing, screwing, tacking and varnishing. Read the relevant manual for the correct
use of these pneumatic tools. The compressor and the connected pneumatic tools may only be operated by a trained person. For persons with limited physical,
sensory or mental abilities as well as children and adolescents, operating the compressor and connected pneumatic tools is prohibited. Intended use also in-
cludes compliance with all the information in this manual.
Any other use or modification of the products is considered improper and involves considerable risk of accidents. We accept no liability for damage resulting
from improper use. The products are intended for private use only and may not be used commercially or industrially.
1.2 Scope of delivery
1 Compressor
2x Wheels
1x Feet
Mounting material:
3x Nut
2x Wheel bolt
1x Hexagon head screw
6
GB/IE/NI/CY/MT
COMPRESSOR 24L - PKO 248 A1
1.3 Equipment
1 On/Off switch
2 Transport handle
3 Pressure regulator
4 Safety valve
5 Quick coupling (for hose connection)
6 Pressure gauge
7 Pressure vessel (tank)
8 Stand
9 Drain plug (for condensation water)
10
11
12
13
Wheels incl. hubcaps
Wheel bolts
Nuts
Hexagon head screw
Publicité
