Publicité
2.2.9.2. Lever front leg control
It activates the intermediate positions of the front leg of the stretcher (the starting
point is the unfolded position).
Note: To return the leg to its original unfolded position, activate the front control and
then raise that part of the stretcher manually so that the leg returns automatically.
Just before the leg reaches the original unfolded position, release the control so that
when the leg reaches that position, the click can be heard, indicating the leg is
locked and thereby ensuring it is fixed in the original unfolded position.
2.2.10. Intermediate positions of the stretcher
The stretcher has three kinds of intermediate positions at different heights from the ground,
depending on each need.
To ensure the safe treatment of the patient, the intermediate position should always be
activated by two people. In addition, the safety belts must be placed on the patient and the
rails raised before activating the intermediate positions.
1st Intermediate position:
Hold the stretcher firmly with both hands to prevent it from making dangerous movements.
Then the stretcher can also be inclined on one part (front or rear) by activating the controls
as described above.
The position is achieved by activating the intermediate position lever (red) located on the
right-hand side of the stretcher. This releases the front legs up to a mechanical stop.
Rev. 7
05.24
OPERATING AND HANDLING
OF THE TGM-241 SERIES
Intermediate position lever
14
Publicité
