Publicité
2.2.3. Adjustable leg rest
- Button for adjusting the leg inclination
The required inclination of the leg rest can be obtained by pressing button A and moving the
leg rest manually. Once the correct inclination has been reached, release button A to
automatically lock the leg rest.
2.2.4. Safety rail (all models)
The safety rail has a red bar that locks the rail into place. To lower the rail, just press the
bar as shown in the figure below. To lock it in the safety position again, move it to that
position manually, and it will automatically lock into place.
Bar
Rev. 7
05.24
A
Rail
OPERATING AND HANDLING
Leg rest
OF THE TGM-241 SERIES
The adhesive on the part of
the stretcher shown in the
drawing on the left indicates
the red button that must be
pressed to adjust the position
of the legs.
8
Publicité
