Publicité
2.2. Operating and handling the stretcher
To prevent injuries to limbs and other body parts, make sure they are not within the range of the
moving parts of the stretcher.
Clarification: The front part of the stretcher corresponds to the head part.
2.2.1. Removable cuffs
Press the button at the top of the cuff, and then pull it to lengthen the cuff, as far as it will
go. To return the cuff to its original position, press the top button again and push it as far as
it will go in the original position:
Top button
2.2.2. Adjustable reclining head
Apply the lever below the head and move it to the required position. Then release the lever
so that the head is locked in the required position.
Head lever
Rev. 7
05.24
OPERATING AND HANDLING
The top adhesive on the part of the
stretcher shown in the drawing on the
left indicates how to manipulate the cuff
Head
OF THE TGM-241 SERIES
to extend it.
7
Publicité
