Télécharger Imprimer la page

Beurer IH 47 Mode D'emploi page 56

Publicité

Problem/question
The output is too low. 1. There are air bubbles in the medication container that prevent continuous
What medications are
suitable for inhaling?
There is inhalation
solution residue in the
medication container
.
2
What should be taken
into account when
using the device with
infants and children?
Possible cause/remedy
contact with the mesh. Please check this and remove any air bubbles.
2. Particles on the mesh are hindering output. In this case, you should pause
the inhalation process and remove the mask or mouthpiece. Then clean
and disinfect the medication container (see "Cleaning and maintenance"
section).
3. The mesh is worn. Replace the medication container
Naturally, only your doctor can decide which medication should be used for
treating your condition.
Please consult your doctor in relation to this matter.
With the IH 47, you can nebulise medications with a viscosity of less than 3.
Medications containing oil (particularly essential oils), pentamidine prepara-
tions and medications containing lipids, should not be used, as these a ect
the material of the medication container, which can lead to faults.
This is normal and due to technical reasons. Stop the inhalation as soon as
the atomiser makes a significantly di erent noise or the device switches o
automatically due to a lack of inhalant.
1. For infants, the mask should cover the nose and mouth to ensure e ective
inhalation.
2. For children, the mask should also cover the nose and mouth. It is not
advisable to use the nebuliser on a sleeping person because too little
medication enters the lungs.
Notice: Inhalation should only be carried out under the supervision of an
adult and with their assistance, and the child should not be left alone.
56
.
2

Publicité

loading