Télécharger Imprimer la page

Beurer IH 47 Mode D'emploi page 52

Publicité

 CAUTION
Never hold the entire device under running water to clean it.
When cleaning, ensure that any residue is removed and dry all parts carefully.
Do not use cleaning products that can be potentially toxic in contact with skin or mucous membranes
if swallowed or inhaled.
If required, clean the housing of the device using a slightly damp cloth, which you can moisten with a
mild soapy solution.
• If there is any residue from medical solutions or contamination on the silver/gold contacts of the
device or medication container
• The device must be switched o and cooled down before each cleaning.
• Do not use any abrasive cleaning products.
 CAUTION
• Ensure that no water enters the device!
• Do not clean the device and atomiser set in the dishwasher.
• Avoid the device coming into contact with splash water. Only operate the device when it is com-
pletely dry.
 CAUTION
We recommend performing the inhalation without interruption, as the inhalant can clog the medication
container
during prolonged interruptions of treatment, which may impair the e ectiveness of the
2
administration.
Self-cleaning function
You can use the device's self-cleaning function to completely remove medication residues and any
blockages.
To do so, proceed as follows:
1. Disassemble the device as described above.
, clean with a cotton bud moistened with ethyl alcohol.
2
52

Publicité

loading