R&G CP0228 Instructions De Montage page 7

Page 7 of 20
Picture 16
Picture 18
Picture 20
Following the assembly diagram place the M12 washers (ITEM 8) over the bolts (ITEMS 5 & 6)
•
followed by the shake proof washers (ITEM 7).
Insert the bolts (ITEMS 5 & 6) with washers into the bobbins (ITEM 1) followed by the 18mm
•
Spacer (ITEM 3) over the 100mm bolt (ITEM 5), and the 15mm long spacer (ITEM 4) over the
110mm bolt (ITEM 6).
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
R&G Racing
www.rg-racing.com
CP0228
Picture 17
Picture 19
Picture 21
Email: info@rg-racing.com