R&G CP0228 Instructions De Montage page 3

Page 3 of 20
RHS
Before removing engine bolts, ensure the bike is upright and supported by a suitable engine
stand or jack placed under the sump of the motorbike to support the partial weight of the
engine, this will prevent the engine from moving during fitting. DO NOT REMOVE MORE
THAN 1 ENGINE BOLT AT ANY TIME. Assemble the crash protectors before removing the
engine bolts to limit the amount of time the engine is partially un-supported.
To fit to the '08-'11 & '12 – '16 models
Picture 1
Picture 3
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
LHS & RHS EXPLODED ASSEMBLY VIEW
R&G Racing
LHS
Picture 2
www.rg-racing.com Email:
CP0228
info@rg-racing.com