Publicité
smartRail
Overview of the funktions
smartRail
smartRail is an intelligent stationary loop rail with integrated Z21 technology and integrated WLAN
router. smartRail allows you to drive your most beautiful digital DC and AC locomotives in your
showcase or on your desk in standstill – while switching on all digital functions of the models.
The locomotives are controlled easily and comfortably with the elegantly integrated touch panel or
with external control devices – generally a Smartphone with Z21 mobile app, a tablet PC with a Z21
control stand app or a classic
Overview of the functions:
• Intelligent stationary loop rail with integrated Z21 technology
• For analogue DC locomotives as well as all digital DC and AC locomotives (DCC, MM; automa-
tic detection)
• Simulated driving operation in the showcase, on the shelf or on your desk
• Comfortable access to all digital functions
• Integrated WLAN router for comfortable remote control
• Locomotive controls and locomotive programming via
• iOS- or Android-based Smartphones and tablet PCs or the
28
– Overview of the functions
MAUS. smartRail supports all iOS and Android-based models.
multi
MAUS
multi
Touch panel
Infrarot-
3. Conductor
Stationary
Sensor
for AC models
loop rail
Top side
F1
F1 F2
F2 F3
F3 F4
F4
Front light
Thrust
left
On / off
Functions
switch
1-4
Connections
Bottom side
Touch panel and Connections
LED-Übersicht
Infrared
sensor
Key " "
• Blue: Standby
• White: On
Keys F1-F4, " "
• Dark: Function off
• Light: Function on
Taste „
"
• Blinks red for a long time with
short intervals: Please set the
Thrust
locomotive on the rails.
right
• Glows red permanently: The
Stand
Slider
locomotive was measured
successfully. Search for the
locomotive address can be
started. Scanning is indica-
ted by sequential light of the
function keys.
• Glows pale red: No locomotive
was found in the scanning
process.
DC power supply
• Glows white: Locomotive stop
X-bus
• Blink red: Short circuit or sen-
sor interruption. Reactivation
via " " key.
29
Publicité
