Publicité
smartRail
Legal Information
Legal Information
smartRail
Before putting
into operation, please note the following information:
• When combining ROCO or Fleischmann components with products by third party manufacturers, we provide no warranty in case of damage
or malfunction.
• If the smartRail case is opened your claim to warranty is voided.
• Connections should only be made when the operating voltage is switched off!
• Work carefully: Incorrect connections may destroy digital components. If necessary, ask your specialised dealer for help.
• Never connect an analogue transformer or other digital systems or command centre to the same or adjoining current circuits. This may destroy
smartRail!
• The lenses of the infrared sensors must not be touched and scratched!
• When operating a locomotive with steam generator, the Plexiglas cover must be removed.
• Store and operate only at room temperature!
• Do not set up near radiators or in places with direct sunlight!
• Avoid major fluctuations of temperature and air humidity!
• The sensors work optically and can be blinded. Therefore, avoid excessive exposure to light. This may cause an unintentional emergency stop.
• Do not operate smartRail with glass hood as this may interfere with the sensors.
• The manufacturer does not guarantee that smartRail is compatible with all locomotive geometries.
• The maximum speed of the locomotives is regulated down to the maximum speed of the roller dynamometer.
• Depending on their geometry, the locomotives must have a length of 120mm to 305mm.
• Depending on their geometry, smaller locomotives must be driven with carriages attached.
26
Contents
smartRail – Overview of the functions
1. smartRail – Operation on the touch panel
1.1. How to connect smartRail
1.2. How to put smartRail into operation
1.3. How to put your locomotive on rails
1.4. How you control your locomotive with smartRail
1.5. Reset and update of smartRail
1.6. Fault conditions
2. External control units: Smartphone, tablet PC, multiMAUS
3. Operation with Smartphone/tablet PC and Z21 mobile app
3.1. Installation of the Z21 mobile app
3.2. How to register the end device
4. Discover the world of digital model railways through play!
5. You take control!
6. Operation with
mult
iMAUS
7. Care instructions
Contents
28
30
30
30
31
31
32
32
33
34
34
34
36
38
40
41
27
Publicité
