Publicité
@ REC
Il PAUSE
Tips
¢ To make your editing more
precise, use the buttons on
both VCRs."
e To cut out unwanted scenes
while editing, press
§§ PAUSE on this VCR when
an unwanted scene begins.
When it ends, press
Ii PAUSE again to resume
recording.
Operation (when recording on this VCR)
Before you start editing
On the playback VCR
e Switch on the BDIT mode if available.
e Turn off on-screen displays.
e When recording a stereo source tape, set the playback VCR to output
stereo sound.
On this (recording) VCR
e Press EDIT to turn on EDIT indicator.
1
insert a source tape with its safety
tab slid out to show the red
portion into the other (playback)
VCR. Search for the point to start
playback and set it to playback
pause.
2
Insert a tape into this (recording)
VCR. Search for the point to start
recording and press II PAUSE.
3
Press @ REC on this VCR.
The VCR is set to recording pause.
4
tostart editing, press the Il PAUSE
buttons.on both VCRs to release.
the VCRs from pause.
:
For best results, press #8 PAUSE on this
VCR just before pressing
the pause button on the other VCR.
To stop editing
Press the HM STOP buttons on both VCRs.
Editing | 17-EN
Publicité
