Publicité
Editing without the
LANC cable
connection
Tip
e Ifthe other VCR has an S-
video connector, connect the
VCRs using an S-video cable.
In this case, you don't need
to connect video jacks.
Notes
¢ If you connect a monaural
VCR using the supplied
audio/video cable, you
cannot record both audio
channels at the same time.
Use a 3-phono plug to 2-
phono plug audio/video
cable suck.as VMC-910HG
or 2-phono plug to 1-phono
plug audio cable such as RK-
C230HG.
¢ Make sure you connect the
plugs to jacks of the same
color.
¢ If you connect both the LINE
IN and LINE OUT jacks of
this VCR to the other VCR,
select the input correctly to
prevent a humming noise..
16-EN | Editing
If the other VCR isn't equipped with a LANC jack, connect your VCR
and the other VCR as shown below. You can make a copy of a tape
using this VCR for recording or playback.
How to hook up to record on this VCR
This VCR (Recorder)
S VIDEO
LINE IN
S-video cable (supplied)
$ VIDEO
LINE OUT
Other VCR (Player)
coc
: Signalflow
Names
Audio/video cable (supplied)
~
LINE OUT
How to hook up to record to another VCR
This VCR (Player)
LINE OUT
S$ VIDEO
LINE OUT
Other VCR (Recorder)
$ VIDEO
LINE IN
S-video cable (supplied)
Audio/video cable (supplied)
co:
Signal flow
Publicité
