Publicité
To avoid accidents, always disconnect the tool and/or charger from the power
supply before servicing or cleaning.
Service
NO
PARTS
nance performed by un au thorized personnel
may result in misplacing of internal wires and
components which could cause serious haz-
ard. We recom mend that all tool service be per-
formed by a Bosch Factory Service Center or
Authorized Bosch Service location .
Tool Lubrication
Your Bosch tool has been properly lubricated
and is ready to use . It is recommended that
tools with gears be regreased with a special
gear lubricant at every brush change .
Carbon Brushes
The brushes and commutator in your tool have
been engineered for many hours of dependable
service. To maintain peak efficiency of the mo-
tor, we recommend every two to six months
the brush es be examined . Only genuine Bosch
replace ment brushes specially designed for
your tool should be used .
30
GWS11-450P_Final_20240417.indd 30
GWS11-450P_Final_20240417.indd 30
page heading
Maintenance
USER
SERVICEABLE
INSIDE.
Mainte-
Cleaning
Certain cleaning agents and
solvents
parts. Some of these are: gasoline, carbon tet-
rachloride, chlorinated cleaning solvents, am-
monia and household detergents that contain
ammonia .
Ventilation openings, press jaw holder, and
buttons must be kept clean and free of foreign
matter . Do not attempt to clean by inserting
pointed objects through opening .
Accessory Storage and Maintenance
Store accessories in a cool dry place and avoid
freezing . Before use, check accessory for cracks
and fractures, do not use if damage is suspect-
ed .
damage
plastic
4/17/2024 10:53:36 AM
4/17/2024 10:53:36 AM
Publicité
