Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

14 Progress
How to fill the rinse aid
dispenser
B
CAUTION! Only use rinse aid
designed specifically for
dishwashers.

DAILY USE

1. Open the water tap.
2. Press and hold
is activated.
3. Fill the salt container if it is empty.
4. Fill the rinse aid dispenser if it is
empty.
5. Load the baskets.
6. Add the detergent.
7. Select and start a programme.
8. Close the water tap when the
programme is complete.
Using the detergent
A
C
CAUTION! Only use detergent
designed specifically for
dishwashers.
D
C
A
until the appliance
B
1. Press the release element (A) to open
the lid (B).
2. Pour the rinse aid in the dispenser (C)
until the liquid reaches the marking
"FILL".
3. Remove the spilled rinse aid with an
absorbent cloth to prevent excessive
foam formation.
4. Close the lid. Make sure that the lid
locks into position.
Fill the rinse aid dispenser
when the indicator (D) is clear.
1. Press the release button (B) to open
the lid (C).
2. Put the detergent in the compartment
(A). You can use detergent in tablets,
powder or gel.
3. If the programme has a prewash
phase, put a small quantity of
detergent on the inner part of the
appliance door.
4. Close the lid. Make sure that the lid
locks into position.
How to select and start a
programme
1. Press the button dedicated to the
programme you want to set.
The light related to the button flashes.
2. Activate Extra power if desired.
3. Close the appliance door to start the
programme.
How to select and start the
programme Pre Rinse
1. To select Pre Rinse, press and hold
30min for 3 seconds.
The light related to the button flashes.

Publicité

Chapitres

Table des Matières
loading

Table des Matières