Progress PVS1552 Notice D'utilisation page 15

Extra power is not applicable to
this programme.
2. Close the appliance door to start the
programme.
How to activate Extra power
1. Select a programme.
2. Press Extra power.
The light related to the button is on.
Extra power is not a permanent
option and must be activated
every time before you start a
programme.
It is not possible to activate or
deactivate Extra power while a
programme is running.
Activating Extra power
increases the water and energy
consumption as well as the
programme duration.
How to select and start the
programme AUTO
1. Press AUTO.
The light related to the button is on.
Extra power is not applicable to
this programme.
2. Close the appliance door to start the
programme.
The appliance senses the type of load and
adjusts a suitable wash cycle.
How to delay the start of a
programme
You can delay the start of the selected
programme by 3 hours.
1. Select a programme.
2. Press .
The light related to the button is on.
3. Close the appliance door to start the
countdown.
During the countdown, it is not possible to
change the programme selection.
When the countdown is complete, the
programme starts.
How to cancel the delay start
while the countdown operates
Press and hold
The appliance returns to the programme
selection.
If you cancel the delay start,
you have to select the
programme again.
How to cancel a running
programme
Press and hold
The appliance returns to the programme
selection.
Make sure that there is
detergent in the detergent
dispenser before you start a
new programme.
Opening the door while the
appliance operates
Opening the door while a programme is
running stops the appliance. It may affect
the energy consumption and the
programme duration. After closing the
door, the appliance continues from the
point of interruption.
If the door is opened for more
than 30 seconds during the
drying phase, the running
programme ends. It does not
happen if the door is opened by
AirDry function.
The Auto Off function
This function saves energy by switching
the appliance off when it is not operating.
The function comes into operation
automatically:
• When the programme is completed.
• After 5 minutes if a programme was not
started.
Progress 15
for about 3 seconds.
for about 3 seconds.