Publicité
31
COMPUTER OPERATION MANUAL
In standby mode, you can switch directly to training mode by briefly pressing the computer. By de-
fault, the device switches to display cycle mode (display cycle symbol lights up) and the display shows
'Speed', 'Power', 'Distance', 'Calories burned', 'Cadence' and 'Heart rate' in sequence. The display
changes every approx. 3 seconds (Figures 3, 4, 5, 6, 7, 8).
The outer illumination of the display changes depending on the cadence range during training:
a) Cadence range 0 - 60: Green lighting (Figure 9)
b) Cadence range 61 - 100: Yellow lighting (Figure 10)
c) Cadence range above 100: Red lighting (Figure 11)
Publicité
