Publicité
28
FOLDING / UNFOLDING
FOLDING
Pull out the pin (48), lift the left rail (3L) in the direction of the arrow while lifting the left roller arm (7L)
with the other hand until the pin (48) engages in the hole.
Then fit and attach the end cap (55) to the screw (C) on the left-hand roller arm (7L), as shown in Figure
D.
Repeat this procedure for the right-hand rail (3R) in the same way.
CAUTION! ALWAYS WATCH YOUR FINGERS DURING FOLDING TO AVOID POSSIBLE INJURY!
UNFOLDING
Unfolding is carried out in the reverse order to folding. Pull out the pin (48), loosen the end cap (55)
from the screw (C) on the left roller arm (7L), hold the left roller arm (7L) firmly and pull the left rail (3L)
downwards with the other hand until the pin (48) engages in the hole provided.
Then place the left roller arm (7L) on top of the left rail (3L).
Repeat this procedure for the right-hand rail (3R) in the same way.
CAUTION! ALWAYS WATCH YOUR FINGERS WHEN UNFOLDING TO AVOID POSSIBLE INJURY!
Publicité
