Publicité
SET-UP INSTRUCTIONS
STEP 6
1. Place your hand on point B, lift the left roller arm (7L) and fit the cover (29) to the left roller arm (7L)
using the Phillips screws (24);
2. Proceed in the same way for the right-hand roller arm (7R);
3. Attach the roller cover (58) and the roller arm cover (61) to the roller arms (7L/R) using the screws
(23) as shown;
4. The pedal arm covers (60a/b) are attached to the joints of the swing arms (5L/R) / pedal arms (9L/R)
using the screws (26);
5. Finally, the flywheel arm covers (59a/b) are attached to the swing arms (5L/R) using the screws (24).
26
Publicité
