Publicité
STEP 7
1. Connect the hand pulse cable (75) and the sensor cable (79) to the corresponding cable ends of
the computer (76) and then attach the computer (76) to the top of the handlebar post (2) using the
screws (77). Take care not to pinch the cables!
2. Fit the storage holder (57) to the handlebar post (2) using the screws (24) as shown.
3. Now connect the adapter (50) to the device and a suitable socket to establish the power supply.
27
SET-UP INSTRUCTIONS
CHECK IF ALL BOLTS AND NUTS ARE
TIGHTENED BEFORE USING THE
DEVICE!
Publicité
