Publicité
COMPUTER OPERATION MANUAL
Display variants:
1. Display cycle:
• Each data value is displayed for 3 seconds
• The display switches to this mode by default while the display cycle
icon is illuminated
• The display shows the following data parameters in sequence: Speed,
power, distance, calories burned, cadence and heart rate
• The Bluetooth symbol is used as an indicator for the Bluetooth connec-
tion status. It lights up when a connection has been established and
goes out when there is no connection.
2. Display of a single function value:
• By briefly pressing the computer, you can switch the display mode and
select the desired data for the display (the symbol for the display cycle
goes out).
• The following data parameters can be selected for constant display:
Speed, power, distance, calories burned, cadence and heart rate.
• If 'Cadence' is selected and you stop pressing the computer, the device
returns to display scroll mode (display cycle symbol lights up).
3. Pause mode:
• If no movement data is recorded within 5 seconds in training mode, the
device automatically switches to pause mode.
• During this time, the external lighting lights up orange and flashes. At
the same time, the text 'Pause' flashes synchronously on the screen and
prompts you to end the training session by pressing and holding.
• In pause mode, a 60-second countdown is shown on the display. If
there is no activity within 60 seconds, the training session ends auto-
matically.
4. Lighting adaptation:
• The outer illumination of the display changes depending on the ca-
dence range:
a) Cadence range 0 - 60: Green lighting.
b) Cadence range 61 - 100: Yellow lighting.
c) Cadence range above 100: Red lighting.
29
COMPUTER OPERATION MANUAL
Publicité
