Publicité
SET-UP INSTRUCTIONS
STEP 4
1. Attach the swing arms (5L/R), the axle (35) and the covers (59) to the handlebar post (2) on both
sides using the corrugated washers (37), screws (17), spring washers (28) and washers (32) as shown.
Please only tighten loosely at first.
2. Fit the pedal arms (9L/R) to the roller arms (7L/R) using the screws (17), spring washers (28) and
washers (31). Here too, only attach loosely at first.
3. Now connect the pedal arms (9L/R) to the swing arms (5L/R) using the bolts (21), spacers (42), wash-
ers (34) and nuts (40). Now tighten all the connections from this step.
4. Mount the treads (56) on the pedal arms (9L/R) using the screws (22).
24
Publicité
