Publicité
SET-UP INSTRUCTIONS
SET-UP INSTRUCTIONS
Before you start assembling, we recommend that you find a place with sufficient free space and a
flat surface for assembly. Read through the instructions and familiarise yourself with the assembly
process. Although this product can be assembled by one person, we recommend having another
person help you. This is particularly useful when assembling several parts or moving the appliance.
Assembly tip: It is always helpful to have the parts required for the individual assembly steps ready in
advance.
Please use the parts list to check whether all the parts required for assembly are available. Some parts
may already be pre-assembled to make assembly easier for you.
We recommend that you use the tools supplied to assemble the appliance.
STEP 1
Loosen the washer (C), flat washer (D) and nut (E)
from the main frame (1) and remove the plastic pro-
tective tube (A).
STEP 2
1. Attach the adjustable feet (69) to the front stand
(10).
2. Then fit the front stand (10) to the main frame (1) us-
ing 2 screws (12), 2 spring washers (27) and 2 wash-
ers (30).
3. Remove the end caps (67) from the rails (3 L/R).
4. Insert the axle (4) into the rear tube of the main
frame (1) and then fasten the rails (3 L/R) with the screws (12), spring washers (27) and washers (25)
as shown below. Replace the end caps (67).
22
Publicité
