Publicité
Can even be used to machine non-ferrous metals when used
at a low speed with the appropriate router bits.
Product features
The numbering of the product features refers to the diagram of
the power tool on the graphics page.
(1) Right handle (insulated gripping surface)
(2) Lock-on button for on/off switch
(3) Cap nut with collet
a)
(4) Router bit
(5) Spindle locking lever
(6) Screw for parallel guide rods (2x)
(7) Chip protection
(8) Step buffer
(9) Adjusting screws for step buffer
(10) Guide plate
(11) Holder for parallel guide rods
(12) Base plate
(13) Depth stop
(14) Screw for depth stop fixing
(15) Adjustment range for fine adjustment of routing depth
(16) Left handle (insulated gripping surface)
(17) Release lever
(18) Scale for fine adjustment of routing depth
(19) Adjustment knob for fine adjustment of routing depth
(20) Scale for setting routing depth
(21) Slide with index mark
(22) Speed preselection thumbwheel
(23) On/off switch
(24) Extraction hose port
(25) Open-ended spanner (19 mm width across flats)
(26) Extraction hose (dia. 35 mm)
(27) Parallel guide
(28) Guide rod for parallel guide (2x)
(29) Wing bolt for parallel guide fine adjustment (2x)
(30) Wing bolt for parallel guide coarse adjustment (2x)
(31) Adjustment knob for parallel guide fine adjustment
(32) Adjustable fence for parallel guide
(33) Extraction adapter for parallel guide
(34) SDS guide-bushing adapter
(35) Fastening screw for guide-bushing adapter (2x)
(36) Release lever for guide-bushing adapter
(37) Guide bushing
(38) Pan head screw for guide plate fixing (5x)
16
The specifications apply to a rated voltage [U] of 230 V. These specific-
ations may vary at different voltages and in country-specific models.
Noise emission values determined according to
EN 62841-2-17.
Typically the A-weighted noise level of the power tool are:
93 dB(A); sound power level 104 dB(A). Uncertainty
K = 3 dB.
Wear hearing protection!
a)
Vibration total values a
determined according to EN 62841-2-17: a
K = 1.5 m/s
The vibration level and noise emission value given in these in-
structions have been measured in accordance with a standard-
ised measuring procedure and may be used to compare
power tools. They may also be used for a preliminary estima-
tion of vibration and noise emissions.
The stated vibration level and noise emission value represent
a)
the main applications of the power tool. However, if the
power tool is used for other applications, with different applic-
ation tools or is poorly maintained, the vibration level and
noise emission value may differ. This may significantly increase
the vibration and noise emissions over the total working
period.
(39) Centring pin
a) Accessories shown or described are not included with
the product as standard. You can find the complete
selection of accessories in our accessories range.
Technical data
Router
Article number
Rated power input
No-load speed
Speed preselection
Constant electronic control
Soft start
Connection for dust extrac-
tion
Digital depth display
Light ring
Compatible collets
Router cage stroke
Weight according to EPTA-
Procedure 01:2014
Protection class
Noise/Vibration Information
(triax vector sum) and uncertainty K
h
2
.
OF 1250-E
5706 210 0
W
1250
-1
min
10000–24000
●
●
●
●
–
–
mm
6–8
inches
¼
mm
60
kg
3.6
/ II
2
= 7 m/s
,
h
Publicité
