Publicité
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
Items supplied
2. Additional handle
7. Polishing / sanding disk
10. Sanding and polishing machine
11. Foamed plastic attachment
12. Synthetic polishing attachment
13. Sanding attachment K = 60
14. Sanding attachment K = 80
15. Sanding attachment K = 120
16. Hexagon key 8 mm
17. Socket head screw M 10 x 20 mm (2 pcs)
•
Original operating instructions
•
Safety instructions
3. Proper use
The machine is designed for polishing coated
surfaces and for sanding wood, plastic and si-
milar materials using the appropriate abrasive
paper. The abrasive paper which is included with
the product is for sanding wood.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Improper use
All applications with the device which are not sta-
ted in the chapter "Intended use" are deemed to
be contrary to the intended use.
The device must not be used for the following
purposes:
•
Work on lightweight partition walls (drywalls)
and other surfaces containing plaster, ce-
ment, foam, mineral fiber and silicate.
•
Work on metals involving the generation of
metal dust.
•
Working on coatings containing lead and
working on types of wood and metal which
generate harmful or toxic dust
•
Sharpening, engraving with corresponding
attachments
•
Working on materials containing asbestos
•
Use in areas where there is a risk of explosion
•
Sanding on damp walls
Anl_CC_PO_1100_150_CE_SPK13.indb 14
Anl_CC_PO_1100_150_CE_SPK13.indb 14
GB
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain residual
risks cannot be rules out. The following hazards
may arise in connection with the equipment's
construction and layout:
•
Contact with the unguarded wheel (injuries
through cutting)
•
Reaching into the wheel while it is still rotating
(injuries through cutting)
•
Catapulting of parts of the wheel (injuries
through cutting or bruising)
•
Catapulting of parts of the material being pro-
cessed (injuries through cutting or bruising)
•
Risk of fire from flying sparks
•
Damage to hearing if the compulsory hearing
protection is not used (hearing loss)
•
Inhalation of abrasive particles from the mate-
rial and wheel
•
Electric shock upon contact with non-insula-
ted electrical parts
If the instructions listed in the operating instruc-
tions are not adhered to, improper handling of the
equipment may result in other residual risks
4. Technical data
Voltage: .............................. 220-240 V ~ 50/60 Hz
Power rating: ............................................ 1100 W
Speed n: .......................................500-3500 min
Polishing / sanding disk diameter: .......... 150 mm
Connection thread: ....................................... M14
Protection class: ............................................ II/
Weight: .......................................................2.6 kg
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 62841.
L
sound pressure level ..................... 92.3 dB(A)
pA
K
uncertainty ............................................. 3 dB
pA
L
sound power level ..................... 100.3 dB(A)
WA
K
uncertainty ............................................. 3 dB
WA
- 14 -
-1
19.09.2024 15:12:42
19.09.2024 15:12:42
Publicité
