Publicité
P1
Hydraulic oil
Fill with hydraulic oil up to the mark.
Bleeding the lift
see "Bleeding the air from the scissor lift"
Electrical connection
Attention
The general and local regulations must be observed.
Therefore, this step may only be carried out by a trained specialist. Pay attention to the
necessary supply line (see
Check all connections (screws, nuts, bolts, etc.) for correct fastening.
Check all limit switches for correct setting and function.
Check all hydraulic and pneumatic components and connections for leaks and tighten if necessary.
® Copyright ATH-Heinl GmbH & Co. KG / All rights reserved / Misprints and technical changes reserved
80
P2
"Electrical
Release date: 27.09.2024 / Product manufacturer ATH-Heinl GmbH & Co. KG
connection".)
Publicité
