Publicité
Location Minimum distances
1000 mm
B1
L1
approx. 2800 mm
approx. 4000 mm
H
2.5
Fastening
Warning
General and local regulations must be observed when installing the device.
These steps should therefore only be carried out by a trained specialist.
The machine must be set up and secured on a sufficiently firm surface, if necessary in accordance with the
minimum requirements specified in the
The machine must be fastened at the intended points with suitable fastening material, if specified.
When selecting the installation location, the guidelines and instructions of the accident prevention regulations
and the workplace regulations must be observed in addition to the floor conditions.
® Copyright ATH-Heinl GmbH & Co. KG / All rights reserved / Misprints and technical changes reserved
"Foundation plan"
Release date: 27.09.2024 / Product manufacturer ATH-Heinl GmbH & Co. KG
1000 mm
B2
L2
approx. 2800 mm
and secure it in place.
73
Publicité
