Publicité
2
INSTALLATION
The machine must be installed by authorized personnel in accordance with the instructions.
Note
The operating instructions (including protocol) are an important part of the machine or
product.
Please keep it in a safe place!
The product must be inspected by a suitable and authorized company or institution after completion of
assembly, handover, instruction if necessary, and subsequently at regular intervals in accordance with the
regulations and legal provisions in force in the country of operation.
2.1
Transport and storage conditions
To transport and position the machine, always use suitable slinging, lifting or ground conveyors and pay
attention to the center of gravity of the machine.
The machine should only be transported in its original packaging.
Machine data
Machine weight
Width
length
Height
Storage temperature
Instructions for transportation and storage
Attention
Lift carefully and only move the load with suitable tools that are in perfect condition.
Attention
Avoid unexpected elevations and jolting movements. Take care on uneven surfaces,
crossways, etc.
® Copyright ATH-Heinl GmbH & Co. KG / All rights reserved / Misprints and technical changes reserved
70
Release date: 27.09.2024 / Product manufacturer ATH-Heinl GmbH & Co. KG
752 kg
820 mm
1660 mm
825 mm
-10 to +50°C
Publicité
