Publicité
• Do not use different battery types or brands,
new and used batteries in combination, or
batteries with different capacities, as they leak
and can thus cause damage.
• Observe the polarity (+/-) when inserting
batteries.
• Change all batteries at the same time and
dispose of the old batteries properly.
• Warning! Batteries may not be charged or
reactivated in any way. They may not be dis-
mantled, thrown into fire, or short-circuited.
• Always keep batteries out of the reach of
children.
• Do not use rechargeable batteries!
• The cleaning and user-maintenance may not
be carried out by children without supervision.
• Clean the batteries and the device contacts as
necessary and before inserting the batteries.
• Do not expose the batteries to extreme
conditions (e.g. radiators or direct sunlight).
Otherwise there is an increased risk of leaks.
• Warning. Used batteries must be disposed of
immediately. Keep new and used batteries out
of the reach of children. Seek medical help
immediately if you suspect that batteries have
been swallowed or ingested.
Danger!
• Handle a damaged or leaking battery with
extreme care and dispose of it properly and
immediately. Wear gloves to handle the
battery.
• If you come into contact with battery acid then
wash the affected area with soap and water.
If battery acid gets in your eye rinse it out with
water and seek medical help immediately!
• Do not short-circuit the terminals.
Inserting/replacing batteries
(fig. E)
WARNING! Comply with the following
instructions in order to prevent
mechanical and electrical damage.
For inserting and replacing the batteries (18)
proceed as shown in fig. E.
Note: You will need a suitable screwdriver (not
contained in delivery).
Note: Pay attention to the plus/minus polarity
of the batteries and their correct installation.
The batteries must be located entirely inside the
battery compartment.
Assembly
Follow the individual steps as shown in figs. B–D
to assemble the product.
Note: First assemble the basic structure with the
floors (1), (2) and the walls (5), (6) and then
insert the side walls (3) (fig. B).
Assembly options
You will find options for assembly in the en-
closed overview.
Note: The vehicles may derail with assembly
options with many consecutive curves!
Clean the rails with a damp cloth before first use!
Activating and deactivating
the electric vehicle (fig. F)
• Press the button (17a) to activate forward
motion of the electric vehicle (17).
• Press the button (17a) once to deactivate the
electric vehicle.
Storage, cleaning
When not in use, always store the product dry,
clean, without batteries, and at room temperature.
Only clean the product with a damp cloth and
wipe dry afterwards.
Attention: the rails should be cleaned before
using them for the first time!
IMPORTANT! Never clean the product with
harsh cleaning agents.
GB/IE/NI
7
Publicité
