Publicité
WALL CONTROL UNIT KIT
To improve access to the control unit for the tallest units, a kit can be provided as an option to allow the
control unit to be mounted on a wall.
Its code is 125502963.
It includes a mounting plate for the unit to be mounted on the wall, as well as a 5-metre extension cable to be
inserted between the cable coming out of the unit and the standby electrical harness on the hydraulic valve.
SAMPLE TAPPING
Sample tapping kit 125299220 is available for raw or treated water collection.
It is fitted by removing the cover and replacing the plug with the one supplied with the kit.
Some components are subject to normal wear and tear due to the operation of the equipment. These
components, also called operating and/or wear parts must be regularly replaced by a person qualified and
authorised to perform this operation.
Operating and wear parts are excluded from our general guaranteed conditions.
The frequency of replacement depends on the conditions of installation and operation of the equipment
(pressure, nature of the untreated water, frequency of washing processes).
A visual examination of the appliance must be made at least once a year to assess the condition of the
connections, connectors, display, etc.
•
Regularly check that there are no leaks and replace seals if necessary.
•
Regularly check the washing and rinsing phases.
•
Regularly check whether the vacuum breaker system is operating correctly.
BWT can provide a Technical Assistance Contract for this equipment to keep it in the best possible operating
conditions and ensure its long operational life.
For more information, you can contact your closest regional agency:
FILTER MAINTENANCE
TECHNICAL ASSISTANCE CONTRACT
BWT PURITY PRO XL Technical Manual - code 125502287 - Rev 1 - 27/09/2021
www.BWT.com
37
Publicité
